Furrion Vision S Review: Check for the Plate First
On a trailer with the factory mounting plate this is a screwdriver job and an easy recommendation. Without the plate you are paying for compatibility you cannot use.
Heads up: this page contains affiliate links. If you buy through one, Camp & Chock may earn a commission at no extra cost to you. It never changes which product we put first — how this site is funded.
The verdict
If your trailer has the black factory plate on the rear wall, buy this. Power is already there, the mount is already there, and fitting is genuinely a screwdriver job. If it does not, buy a self-contained system instead — the whole value of this camera is the plate.
Part of our towing and security guide, and the detailed version of the plate question raised in the backup camera roundup.
The check, in thirty seconds
Walk to the back of the trailer and look high and centered on the rear wall. You are looking for a black rectangular plate, usually with a removable cover. Unclip the cover: if there is a connector behind it, your trailer is pre-wired.
A very large number of travel trailers built in recent years have this. A very large number of slightly older ones do not. Do not infer it from the model year — look.
What you find, and what it means
| On the rear wall | Verdict |
|---|---|
| Black plate with a connector behind the cover | Buy this camera. Fitting is minimal |
| Black plate, no connector | Mount is there, power is not. Check before buying |
| No plate at all | Buy a self-contained system instead |
| A different brand's plate | Check the connector type. Adapters exist for some combinations |
What fitting is actually like with the plate
Unclip the cover. Plug the camera into the connector. Screw the camera onto the plate. Power the monitor from a socket in the cab, pair it, and set the view. Most people are done inside half an hour and the only tool is a screwdriver.
That is the entire pitch, and it is a strong one. The cable run down the length of a trailer is the job that stops most people fitting a camera at all, and the plate removes it completely.
What it is like to use
The picture is clear enough for the two jobs that matter: lining up on a hitch, and seeing traffic behind you on the highway. In bright daylight the limiting factor is usually the monitor rather than the camera, which is true of most systems in this category.
Wireless reliability depends on rig length. On a normal travel trailer it is not something you think about. On a long fifth wheel, the distance from the back of the trailer to the front of a crew cab is a real ask of any wireless link, and it is worth reading the current specification on Furrion's site before assuming.
Who should skip it
Anyone without the plate. You would be buying a camera whose main advantage does not apply to you, and paying for it.
Anyone who wants multiple cameras. If a side camera for lane changes is part of the plan, start with a system built around expansion.
Anyone with a very long rig and no repeater option. Check the range specification against your actual length rather than hoping.
Best for Trailers with a factory Furrion mount
Furrion Vision S Wireless Backup Camera
If there is a black plate on the back of your trailer, this is the camera it was designed for, and fitting it is roughly a screwdriver job.
- Specification
- Wireless camera and monitor
- Specification
- Designed for the pre-wired Furrion mounting plate found on many trailers
- Specification
- Monitor mounts in the tow vehicle
What it does well
- If your trailer already has the black Furrion plate on the back, this is close to plug-and-play
- No cable to run the length of the trailer, which is the job that stops most people
- The pre-wired plate means power is already there
The real tradeoff
- Only a bargain if you have that plate. Otherwise you are paying for compatibility you cannot use
- Wireless range and interference vary. A long fifth-wheel is a harder case than a 22 ft trailer
How it measures up
These are judgments from published specifications and what we see at the lodge, not laboratory results. How we choose.
- Beginner fit
- Strong — With the plate, genuinely easy.
- Install effort
- Strong — No cable run and no drilling, if the plate is there.
- Picture in daylight
- Good — Clear enough for hitching and lane checks.
- Value
- Good — Strong with the plate, poor without it.
Specifications from Furrion.
Which to buy
The plate-matched camera if you have the plate, a self-contained system if you do not, and a tire monitor because the camera shows you what is behind while the monitor warns you about what is underneath.
Best for Trailers with a factory Furrion mount
Furrion Vision S Wireless Backup Camera
If there is a black plate on the back of your trailer, this is the camera it was designed for, and fitting it is roughly a screwdriver job.
Best for Trailers with no factory mount
Haloview MC7108 Wireless Backup Camera System
The answer when your trailer has no factory camera plate: it works on anything, at the cost of mounting and powering it yourself.
Best for Knowing before the blowout
TST 507 Tire Pressure Monitoring System
The only warning you get before a trailer tire fails, because a trailer gives you no feedback through the steering wheel.
Questions people actually ask
How do I know if my trailer has a Furrion camera plate?
Look high and centered on the rear wall for a black rectangular plate with a removable cover. Unclip the cover and check for a connector behind it, which means the trailer is pre-wired.
Can I use this camera without the factory plate?
You would be paying for compatibility you cannot use, and you would have to mount and power it yourself. Buy a self-contained wireless system instead.
How long does it take to fit with the plate?
Most people are done within half an hour with a screwdriver: unclip the cover, plug in, screw the camera on, then power and pair the monitor.
Is the picture good enough in daylight?
Yes for the jobs that matter, which are lining up on a hitch and seeing traffic behind you. In bright sun the monitor tends to be the limiting factor rather than the camera.
Will it work on a long fifth wheel?
Check the stated range against your rig length before buying. A normal travel trailer is an easy case, while a long fifth wheel plus a crew cab is a real ask of any wireless link.
Sources
Read next
Towing & Security
Best RV Backup Camera for a Travel Trailer
Backup cameras for a travel trailer, split by whether your rig has a pre-wired factory mount.
Towing & Security
Best Wireless RV Backup Camera
Wireless camera systems that work on any trailer, with range guidance by rig length.
Towing & Security
How to Install a Wireless RV Backup Camera
Mounting and powering a wireless trailer camera, including the factory plate route and the marker light tap.
Reviewed September 25, 2026. Spot something out of date? Tell us and we will fix it.