Best RV Sewer Hose Accessories
The hose is the part everyone researches. These four cheap things are what decide whether the ten-minute job is actually ten minutes.
Heads up: this page contains affiliate links. If you buy through one, Camp & Chock may earn a commission at no extra cost to you. It never changes which product we put first — how this site is funded.
The short answer
Buy a clear 45-degree elbow first. It is the cheapest item on this page and the only one that gives you information: you can see when the flow runs clear, which is the one reliable way to know a tank is actually empty. Then a seal donut, because plenty of parks require one and tell you after you have set up, a box of gloves that lives in the sewer compartment, and a tank rinser if your trailer has no factory black tank flush.
Part of our sewer and water guide. The hose itself is covered in the sewer hose roundup and the thing that holds it off the ground is in the hose support roundup. This page is about everything else in that compartment.
Our picks at a glance
Tap any row to jump to the full write-up.
| # | Product | Best for | Beginner fit | Price |
|---|---|---|---|---|
| 1 |  Camco RhinoFLEX Clear 45-Degree Sewer AdapterThe clear elbow: the cheapest way to know a black tank is genuinely empty rather than probably empty. | Seeing when the tank is done | Strong | |
| 2 | Camco Rhino Sewer Hose Seal DonutA rubber donut that seals the hose into the park's sewer inlet. Many parks require one, and most people find that out on arrival. | Parks that require a sealed connection | Strong | |
| 3 | Heavy-Gauge Disposable Nitrile Gloves (box)Keep a box in the sewer compartment itself. The gloves that live inside the trailer are the gloves you do not use. | The obvious thing nobody packs | Strong | |
| 4 |  Camco Rhino Blaster Tank RinserA back-flush for a trailer that never came with one. Use a dedicated rinse hose for it, never the drinking-water hose. | Rigs with no built-in flush | Good |
Prices come from Amazon and were last checked November 12, 2026. They change constantly, so a price older than 48 hours is withdrawn rather than shown stale — those rows read “Check price on Amazon” instead and go straight to the current listing. #ad — these are affiliate links.
Who this is for
Someone who bought a sewer hose kit, used it once, and discovered that the job involved three small frustrations nobody mentioned: not knowing when the tank was done, being told by the park that the connection needed sealing, and realizing the gloves were inside the trailer.
Every item here costs very little. None of them is interesting. Together they are the difference between a routine ten-minute task and the story you tell for years.
Check your kit before you buy any of this
This is the first piece of advice because it saves the most money. The better sewer hose kits already include a clear elbow and sometimes a seal. Open the box and look before you order a second one.
What kits almost never include is the rinser, the gloves or a spare seal. And what they include varies between listings of the same product family, which is why reading the contents matters more here than in most categories.
How we choose
Does it give you information, or only convenience. A clear elbow tells you something you cannot otherwise know. That is worth more per dollar than anything else on this page.
Does it stop a connection coming apart. A threaded ring on the sewer inlet and a seal in it are what keep the business end where you put it. The failure this prevents is the one that ruins an afternoon.
Does it live where it is needed. Gloves inside the trailer are gloves you will not use. The right product is a box that stays in the sewer compartment permanently.
Does it replace a feature your trailer lacks. A rinser gives a trailer with no factory black tank flush the same back-fill capability for a fraction of what a retrofit would cost.
We do not test products and say so on how we choose.
The picks
1. Best for Seeing when the tank is done
Camco RhinoFLEX Clear 45-Degree Sewer Adapter
The clear elbow: the cheapest way to know a black tank is genuinely empty rather than probably empty.
- Specification
- Clear 45-degree elbow
- Specification
- Fits the standard bayonet hose end
- Specification
- Threaded ring for the sewer inlet
What it does well
- You can see when the flow runs clear, which is the only reliable way to know a tank is empty
- The threaded ring keeps the connection in place instead of backing out mid-dump
The real tradeoff
- Clear plastic stains over a season
- Usually already included in the better kits, so check before buying twice
How it measures up
These are judgments from published specifications and what we see at the lodge, not laboratory results. How we choose.
- Beginner fit
- Strong — Screws on, and then it is obvious.
- Durability
- Good — Fine. It stains rather than fails.
- Storage
- Strong — Tiny.
- Value
- Strong — Small money for real information.
Specifications from Camco.
2. Best for Parks that require a sealed connection
Camco Rhino Sewer Hose Seal Donut
A rubber donut that seals the hose into the park's sewer inlet. Many parks require one, and most people find that out on arrival.
- Specification
- Rubber donut seal
- Specification
- Sits in the sewer inlet
- Specification
- Required by many parks
What it does well
- Plenty of parks require a sealed connection and will tell you so after you have set up
- Costs almost nothing and takes no space
The real tradeoff
- Easy to leave behind in the inlet when you pack up
How it measures up
These are judgments from published specifications and what we see at the lodge, not laboratory results. How we choose.
- Beginner fit
- Strong — Drop it in, push the elbow through.
- Durability
- Good — It is a rubber ring.
- Storage
- Strong — No space at all.
- Value
- Strong — Trivial money, and it avoids a conversation.
Specifications from Camco.
3. Best for The obvious thing nobody packs
Heavy-Gauge Disposable Nitrile Gloves (box)
Keep a box in the sewer compartment itself. The gloves that live inside the trailer are the gloves you do not use.
- Specification
- Box of disposable gloves
- Specification
- Nitrile rather than latex
- Specification
- Keep the box in the sewer compartment
What it does well
- The sewer compartment should have its own box, so you never handle the hose bare-handed because the gloves were inside
- Cheap enough that using two pairs is not a decision
The real tradeoff
- Thin gloves tear on bayonet fittings, so buy a heavier gauge than the kitchen box
How it measures up
These are judgments from published specifications and what we see at the lodge, not laboratory results. How we choose.
- Beginner fit
- Strong — Gloves.
- Durability
- Adequate — Buy a heavier gauge than the kitchen box.
- Storage
- Strong — A box.
- Value
- Strong — Almost nothing.
4. Best for Rigs with no built-in flush
Camco Rhino Blaster Tank Rinser
A back-flush for a trailer that never came with one. Use a dedicated rinse hose for it, never the drinking-water hose.
- Specification
- Inline rinser with a gate valve
- Specification
- Garden-hose inlet
- Specification
- Sits between the rig and the sewer hose
What it does well
- Gives a trailer with no factory black-tank flush a proper rinse for very little money
- The gate valve lets you back-fill and hold, which is what actually cleans a tank
The real tradeoff
- Never connect your drinking-water hose to it. Use a dedicated rinse hose, always
- One more fitting in the chain, and every fitting is a place to leak
How it measures up
These are judgments from published specifications and what we see at the lodge, not laboratory results. How we choose.
- Beginner fit
- Good — Simple, with one hard rule about hoses.
- Control
- Good — The gate valve is the useful part.
- Flow
- Good — Adequate rinse pressure from a normal spigot.
- Value
- Strong — A cheap fix for a missing factory feature.
Specifications from Camco.
What each one is for
| Item | The problem it solves | Buy it when |
|---|---|---|
| Clear 45-degree elbow | You cannot tell when the black tank has finished emptying | First. Unless your kit already has one |
| Seal donut | The park requires a sealed connection to its sewer inlet | Before your first trip. They cost almost nothing |
| Box of heavy-gauge gloves | The gloves are always inside the trailer, not at the hose | Immediately, and keep the box in the sewer bay |
| Inline tank rinser with gate valve | Your trailer has no built-in black tank flush | Once you know your rig lacks the factory flush |
The order to buy them in
Before the first trip: the clear elbow if your kit does not have one, a seal donut, and a box of gloves. That is a very small amount of money and it covers the three things that actually go wrong.
After the first dump: the rinser, if you discovered your trailer has no factory black tank flush. You will know, because there will be no second inlet labeled for it.
Later, as the season goes: a spare seal, because one will stay in a park’s sewer inlet when you pack up, and spare gloves, because you should be using two pairs rather than rationing one.
Things people buy here and should not
A second hose instead of a support. If your hose is lying flat on the ground and draining slowly, the problem is slope, not length. That is what a hose support is for, and the two common supports are compared here.
Thin kitchen gloves. They tear on bayonet fittings. Buy a heavier gauge; it is the same money for a box that does the job.
A clear hose. Tempting, and it stains opaque in a season. The clear elbow gives you the same information in the place you are standing, and it is the part you can cheaply replace when it discolors.
Chemical drain products meant for houses. A holding tank is not a drain. Use a treatment made for the job — see Camco TST vs Happy Campers.
The small-parts shopping list
Clear elbow for knowing when the tank is empty. Seal donut because the park will ask. A box of heavy-gauge gloves that never leaves the sewer compartment. A rinser only if your trailer came without a factory black tank flush.
Best for Seeing when the tank is done
Camco RhinoFLEX Clear 45-Degree Sewer Adapter
The clear elbow: the cheapest way to know a black tank is genuinely empty rather than probably empty.
Best for Parks that require a sealed connection
Camco Rhino Sewer Hose Seal Donut
A rubber donut that seals the hose into the park's sewer inlet. Many parks require one, and most people find that out on arrival.
Best for The obvious thing nobody packs
Heavy-Gauge Disposable Nitrile Gloves (box)
Keep a box in the sewer compartment itself. The gloves that live inside the trailer are the gloves you do not use.
Best for Rigs with no built-in flush
Camco Rhino Blaster Tank Rinser
A back-flush for a trailer that never came with one. Use a dedicated rinse hose for it, never the drinking-water hose.
Where these fit in the connection chain
If you are not yet sure what connects to what, the order is: trailer outlet, then the rinser if you have one, then the hose, then the clear elbow, then the seal donut sitting in the park’s sewer inlet with the elbow pushed through it. Each joint is a place that can leak, which is the argument for owning only the fittings you need.
The whole chain, in order, with what each piece is called, is in RV sewer connections explained, and the step-by-step is in how to hook up an RV sewer hose.
Questions people actually ask
What sewer accessories do I need for a travel trailer?
A clear 45-degree elbow so you can see when the tank runs clean, a rubber seal donut because many parks require a sealed connection, a box of heavy-gauge gloves kept in the sewer compartment, and an inline tank rinser if your trailer has no factory black tank flush. Check your hose kit first - the better kits include the elbow.
Do I need a clear elbow for my RV sewer hose?
It is the most useful cheap item in the category. Seeing the flow run clear is the only reliable way to know a black tank is genuinely empty rather than probably empty, and the threaded ring also keeps the connection from backing out mid-dump.
What is a sewer hose seal donut for?
It sits in the park's sewer inlet and seals the hose elbow into it. Many parks require a sealed connection, and most people find that out after they have already set up. It costs almost nothing and takes no storage space, so carry one and a spare.
Can I use my drinking water hose for the black tank rinser?
No, never. Keep a separate hose in a different color, stored away from the fresh water hose and used only for rinsing. This is the one hard rule in the sewer compartment.
Do I need a tank rinser if my RV has a black tank flush?
No. If your trailer has a factory black tank flush inlet, use it. The inline rinser exists to give the same back-fill-and-hold rinse to trailers that were built without one.
Sources
Read next
Sewer & Water
Best RV Sewer Hose for a First Travel Trailer
Complete sewer hose kits compared on length, wall thickness, fittings and storage, for someone doing this for the first time.
Sewer & Water
RV Sewer Connections Explained
The hardware between your tank valve and the campground inlet, named and explained, including the adapter for a PVC connection at home.
Sewer & Water
How to Hook Up an RV Sewer Hose (Step by Step)
The full sewer connection and dumping sequence, in order, with the two checks that prevent the story you tell for years.
Sewer & Water
How to Flush an RV Black Tank
Black tank flushing with a built-in inlet or an add-on rinser, and why the sensors read wrong.
Reviewed October 17, 2026. Spot something out of date? Tell us and we will fix it.